# 504 Drinking Water Basic Tests plus Bacteria Growth Kits

Drinking Water Basic Testing Plus Bacteria compares drinking water from various sources and water treatments. Download # 504 Drinking Water Basics PDF with pH, Alkalinity, Water Hardness, Nitrate, Nitrite, Free Chlorine,Total Chlorine and Bacterial Growth Indicator (8 tests on each water sample)

Good experiment for science project that combines chemical and bacteria testing. Chemical testing only takes a few minutes per sample. The bacteria sample grows for 2 days before reading.


#504 Drinking Water Basics Tests plus Bacteria

Each water sample is tested for this Set of Parameters: pH, Alkalinity, Water Hardness, Nitrate, Nitrite, Free Chlorine and Total Chlorine plus Bacterial Growth Indicator (8 tests on each water sample).

Safe Fast Educational Fun.

Scroll down for information on each water quality test in the #504 Drinking Water Basic Tests Kits.

Contact Us at:   info@schoolsciencekits.com     Please email us your questions and mention something about the students project, grade level, your question and if you want us to call… a phone number.

Thanks, We’ll try to get back to you quickly.

info@schoolsciencekits.com


pH of Water test scale

pH test scales

# 110 pH Testing of Water

Colorimetric test strips. (1 test per strip)

This pH test is very versitile in that it can be used for Drinking Water testing, food processing, environmental applications or in any other water matrix.

pH is short for “Power of Hydrogen”. The balance of positively charged and negatively charged hydrogen ions in drinking water determines pH.

Water that has a low pH is acidic or aggressive and can corrode plumbing resulting in metal ions being present in drinking water and damages fixtures and pipes.

Water that has a high pH is basic and will leave scale in pipes and fixtures.

This test features two test pads both measuring at the same range using different color indicators. This makes color matching easier on the Color Comparator Chart than with other colorimetric tests.

The test reports water pH at the following levels:
2.0, 3.0, 4.0, 5.0, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10, 11, and 12
Results are obtained from this test in 1 minute.

Total Alkalinity of Water test scale

Total Alkalinity test scales

# 105 TOTAL ALKALINITY of WATER

Colorimetric test strips. (1 test per strip)

Total Alkalinity is a fundamental parameter and water testing. Total Alkalinity indicates the buffering capacity of natural waters. A water is said to be buffered if the pH is not changed greatly by addition of acids or bases. The most effective buffering action is within the pH range of water from near 6.0 to about 8.5.


Most natural waters are buffered to some extent by reactions that involve Dissolved Carbon Dioxide (CO2). This Carbon Dioxide is an indispensable reservoir of carbon for photosynthesis. Thus, the productivity’s of water can be correlated with alkalinity and the buffering system.


The Color Comparator Chart for this test allows you to read Total Alkalinity in mg/L or ppm.


This test reports total alkalinity concentrations in water at:
0, 40, 80, 120, 180 and 240 mg/L or ppm.


Results are obtained from this test in 30 seconds.


Total Water Hardness test scale

Total Water Hardness test scale

# 100 TOTAL WATER HARDNESS

Colorimetric test strips. (1 test per strip)

Water Hardness is composed of mostly calcium and magnesium. The water hardness comes from naturally occurring minerals in the local and regional geology being dissolved by water.


Hardness is a key water parameter and its control is important to assure proper water quality. Low Hardness (Soft water) can
contribute to corrosive water. High Hardness (Hard water above 400) can lead to clarity and scaling problems. Water softeners are used to reduce Total Hardness of water.


Testing for hardness in tap water is very common and is very quick and easy with these test strips. The Color Comparator Chart for this test allows you to read Total Hardness in mg/L or ppm.


This test reports calcium hardness concentrations in water at
0, 40, 80, 120, 180, 250, 425, 1000 mg/L or ppm.


Results are obtained from this test in about 5 seconds.

Background Information

Total Hardness (TH) is a measure of the total amount of calcium and magnesium that has naturally leached into the water during its journey through the watershed. In the U.S. water hardness is most often reported as milligrams per liter (mg/L) or parts per million (ppm) as calcium carbonate (CaC03).


It is difficult to produce soap suds in water with high levels of calcium and magnesium ions, hence the term “hardness”.


In addition to reducing the effectiveness of soaps and detergents, hard water may cause an insoluble scale to form on fixtures and on the inside of pipes. Scale formation depends on several factors, one of which is pH.


The EPA does not regulate the levels of hardness in the water supply. There are, however, generally recognized levels that describe the amount of hardness in a water sample:

Hardness as Calclum carbonate (ppm) Classification
0-60 Soft
61-120 Moderately Hard
121-180 Hard
>180 Very Hard

Nitrate and Nitrite in Water test scales

Nitrate and Nitrite test scales

# 135 Nitrate and Nitrite in Water

Colorimetric test strips. (2 tests per strip)

Nitrate / Nitrite test strips are for testing water in many applications from drinking water to water used to wash produce.

Nitrates and nitrites occur normally in nature from the breakdown of ammonia in the nitrogen life cycle. Nitrates in nature cause plant and algae growth that may affect the balance of water-based ecosystems.

Nitrate is found in fertilizers and animal waste. Rain tends to wash fertilizers containing nitrates into nearby natural water systems and ground water. Groundwater used as drinking water that contains nitrogen represents a hazard to babies. Many die every year as a result from “Blue Baby Syndrome.”

The Color Comparator Chart for this test reports concentrations compatible with EPA limits of total nitrogen and nitrite nitrogen in water.

The test reports levels of:
NO3 (as N): 0, 0.5, 2.0, 5, 10, 20, 50 mg/L or ppm;
NO2 (as N): 0.15, 0.3, 1, 1.5, 3, 10 mg/L or ppm.

Results are obtained from this test in 1 minute.

Total and Free Chlorine in Water test scales

Total and Free Chlorine test scale

# 130 Total and Free Chlorine in Water

Colorimetric test strips. (2 tests per strip)

Total Chlorine and Free Chlorine test strips are used for testing
drinking water from a city water treatment system. This dual test is a convenient way of monitoring Total and Free Chlorine.

This test has been calibrated around EPA drinking water standards. Free Chlorine levels of 4.0 mg/L or greater exceeds Maximum
Contaminant Level (MCL) as recommended by EPA.

The Color Comparator Chart for this test reports mg/L or ppm of:
Total Chlorine 0.0, 0.5, 1.0, 2.0, 4.0, 10.0
Free Chlorine 0.0, 0.5, 1.0, 2.0, 4.0, 10.0

Results are obtained from this test in 30 seconds.

Bacteria Growth Check test scale

Bacteria Growth Check test scale

# 180 Bacteria Growth Check

Colorimetric test strips. (1 test per strip)

Bacteria Growth Check is a test strip that has been specially formulated with Brain Heart Infusion media that allows maximum cultivation of fastidious aerobic bacteria found in some waters. This test could be used in a variety of applications, however it is not specific for any particular type of bacteria.

You can dip these strips in water or swab surfaces with them. The Bacteria test procedure then requires you to return the test strip into a clear plastic bag for incubation. After 48 hours of room temperature incubation, any fastidious bacteria on the test pad will multiply and turn the test pad pink to red. The darker and more consistent the test pad, the more bacteria that are present.

Bacteria Growth Check tests only a small water sample and requires a significant quantity of bacteria to show a change on the test pad.



Drinking Water Basic Testing Plus Bacteria compares drinking water from various sources and water treatments.
 Download # 504 Drinking Water Basics PDF with pH, Alkalinity, Water Hardness, Nitrate, Nitrite, Free Chlorine,Total Chlorine and Bacterial Growth Indicator (8 tests on each water sample)

Good experiment for science fair project that combines chemical and bacteria testing. Chemical testing only takes a few minutes per sample. The bacteria sample grows for 48 hours before reading.


# 504 Drinking Water Basics Tests plus Bacteria

Each water sample is tested for this Set of Parameters: pH, Alkalinity, Water Hardness, Nitrate, Nitrite, Free Chlorine and Total Chlorine plus Bacterial Growth Indicator (8 tests on each water sample).

Contact Us at:   info@schoolsciencekits.com     Please email us your questions and mention something about the students project, grade level, your question and if you want us to call… a phone number.

Thanks, We’ll try to get back to you quickly.

info@schoolsciencekits.com

# 504 Drinking Water Basic Tests plus Bacteria Growth Kits
Safe Fast Educational Fun.

Find more school related basic water information at:
www.sciencefairwater.com Water Basics 101 (a web work in progress).