Copper and Acidic Water Testing of copper metal (pipes, wire, penny etc.) by acidic water.
Copper and Acidic Water Testing of copper metal (pipes, wire, penny etc.) by acidic water. Experiment for a first time science fair project. Testing only takes a few minutes per sample.
#580 Copper and Acidic Water Testing
Each water sample is tested for this Set of Parameters: Copper and pH (2 tests on each water sample).
Safe Fast Educational Fun.
Scroll down for information on each water quality test in the #580 Copper and Acidic Water Testing Kits.
Contact Us at: info@schoolsciencekits.com Please email us your questions and mention something about the students project, grade level, your question and if you want us to call… a phone number.
Thanks, We’ll try to get back to you quickly.
pH test scales
# 110 pH Testing of Water
Colorimetric test strips. (1 test per strip)
This pH test is very versitile in that it can be used for Drinking Water testing, food processing, environmental applications or in any other water matrix.
pH is short for “Power of Hydrogen”. The balance of positively charged and negatively charged hydrogen ions in drinking water determines pH.
Water that has a low pH is acidic or aggressive and can corrode plumbing resulting in metal ions being present in drinking water and damages fixtures and pipes.
Water that has a high pH is basic and will leave scale in pipes and fixtures.
This test features two test pads both measuring at the same range using different color indicators. This makes color matching easier on the Color Comparator Chart than with other colorimetric tests.
The test reports water pH at the following levels:
2.0, 3.0, 4.0, 5.0, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10, 11, and 12
Results are obtained from this test in 1 minute.
Copper +1 and +2 test scale
# 165 Copper +1 and +2 in Water
Colorimetric test strips. (1 test per strip)
Copper in drinking water is primarily from its use in plumbing
materials. These Copper test strips are suitable for testing drinking water and other water based samples for soluble copper ion. The EPA Primary Drinking Water Standard for Copper is 1 mg/L or 1 ppm.
This test strip features a patented design for accuracy and lack of interferences. Use a water sample of at least 60 ml or 2 oz.
The Color Comparator Chart for this test reports concentrations of Copper (Cu+1 Cu+2) at the following levels:
0, 0.5, 1.0, 2.0, 5.0 mg/L or ppm.
Results are obtained from this test in about 3 minutes.
Copper and Acidic Water Testing of copper metal (pipes, wire, penny etc.) by acidic water.
Copper and Acidic Water Testing of copper metal (pipes, wire, penny etc.) by acidic water. Experiment for a first time science fair project. Testing only takes a few minutes per sample.
#580 Copper and Acidic Water Testing
Each water sample is tested for this Set of Parameters: Copper and pH (2 tests on each water sample).
Safe Fast Educational Fun.
#580 Copper and Acidic Water Testing Kits.
Contact Us at: info@schoolsciencekits.com Please email us your questions and mention something about the students project, grade level, your question and if you want us to call… a phone number.
Thanks, We’ll try to get back to you quickly.
